TÜRKÇE

PRODUCTS    >    OD - TAKE-UP WINDER   >    TECHNICAL INFORMATION   >    GENERAL TECHNICAL SPECIFICATIONS

GENERAL TECHNICAL PROPERTIES

Speed of the take up winder can reach maximum 600 m/min. Running of winder mechanism is provided by pneumatic and belt-pulley systems. Pneumatic systems provide the mandril arms up and down moves,  forward and back moving of yarn carrier and tray’s up and down motions. Spin of the godets and winding drum and motion of yarn guides are provided by belt-pulley systems. Each winder mechanism has a magazine which has 7 tubes capacity.  Thanks to that operator spend less time to load the tubes. At the rear side of machine there are three conveyor belts for each winding deck. Conveyor belt's motion is provided by motor - gearbox mechanism.  Each conveyor belt system is equipped with belt stop sensors. Sensor's function is moving the belt which is carrying the bobbins until they reach to the edge of the belt at the sensor's side and to stop the belt when bobbins are detected. Operator can activate the conveyor belt via start-stop button.  

 

OD SERIES TECHNICAL PROPERTIES

1

Godet motor

2x4KW

2

Winding drum motor

2x5,5KW

3

Yarn guide drum motor

2x5,5KW

4

Conveyor belt motor

6x0,18KW

5

Pressure of inlet air

6 bar

6

Electrical consumption

15-20 kW

7

Air consumption

0,2 m3/h

8

Maximum speed

600m/min

9

Maximum bobbins diameter

350mm

10

Installed power

40,8KW (380V 50H)

11

Machine length

5765mm

12

Machine width

4290mm

13

Machine height

2200mm

14

Machine weight

4100kg